2024-04-05
Regulatory
Freemelt publishes prospectus in connection with the fully guaranteed rights issue
NOT FOR RELEASE, DISTRIBUTION OR PUBLICATION, DIRECTLY OR INDIRECTLY, IN THE UNITED STATES, AUSTRALIA, CANADA, JAPAN, HONG KONG, NEW ZEALAND, SINGAPORE, SOUTH AFRICA, RUSSIA, BELARUS OR ANY OTHER JURISDICTION IN WHICH THE RELEASE, DISTRIBUTION OR PUBLICATION OF THIS PRESS RELEASE WOULD BE UNLAWFUL OR REQUIRE ADDITIONAL REGISTRATION OR OTHER…
2024-03-28
Regulatory
Bulletin from the extraordinary general meeting in Freemelt Holding AB (publ)
At the extraordinary general meeting (the “EGM”) in Freemelt Holding AB (publ) (the “Company”) on Thursday 28 March 2024, the following resolutions were adopted: Approval of the board of directors’ resolution on a new issue of shares with preferential rights for the shareholders The EGM resolved to…
2024-03-26
Freemelt receives an order from Saab Dynamics targeting defense applications
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing has received an order from Saab Dynamics for a feasibility study targeting material process development of complex materials intended for new innovative solutions within the defense industry.
2024-03-12
Regulatory
Notice to attend the extraordinary general meeting in Freemelt Holding AB (publ)
The shareholders in Freemelt Holding AB (publ), reg. No. 559105-2922 (the ”Company”), are hereby given notice to attend the extraordinary general meeting at 09:00 CET on Thursday 28 March 2024 at Södra Porten Konferens, Flöjelbergsgatan 1 in Mölndal, Sweden. Notice Shareholders wishing to participate at the meeting…
2024-03-12
Regulatory
The Board of Directors of Freemelt resolves on a fully guaranteed rights issue of approximately SEK 66 million
NOT FOR RELEASE, DISTRIBUTION OR PUBLICATION, DIRECTLY OR INDIRECTLY, IN THE UNITED STATES, AUSTRALIA, CANADA, JAPAN, HONG KONG, NEW ZEALAND, SINGAPORE, SOUTH AFRICA OR ANY OTHER JURISDICTION IN WHICH THE RELEASE, DISTRIBUTION OR PUBLICATION OF THIS PRESS RELEASE WOULD BE UNLAWFUL OR REQUIRE ADDITIONAL REGISTRATION OR OTHER MEASURES.
2024-02-20
Regulatory
Freemelt Holding AB (publ) publishes the Interim report for October – December, Q4 and the full year 2023
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing publishes the Interim report for October – December, Q4 and full year 2023. Breakthrough agreement with Fortune 500 technology companyThe most significant event in…
2024-02-09
Regulatory
eMELT enables innovative serial production for the Italian manufacturing industry
Nasdaq First North-listed Freemelt AB – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing has entered a strategic collaboration with WEAREAM, Italy – aiming to accelerate 3D printing as a manufacturing technology via eMELT for serial production of industrial applications.
2024-02-05
Freemelt Q4 2023, live webcast
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing will host a live webcast in connection to the company’s Interim report for the fourth quarter of 2023. Save the date! February 21, 11 am CET,…
2024-01-25
Freemelt receives an order of Freemelt ONE from the prestige University of Sheffield
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing has received an order for a Freemelt ONE machine from the University of Sheffield targeting material research and development of manufacturing methods for tungsten 3D printed components to…
2023-12-22
Regulatory
Key personnel subscribe to employee stock options
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing, has per the decision at the general meeting on May 25, 2023, decided that key personnel will have the right to sign employee options. Following the decision…
2023-12-20
Regulatory
Freemelt appoints Regional President for the EMEA market
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing has appointed Viktor Valk as Regional President for the EMEA market. Viktor Valk is currently serving as Business Unit Manager at Sandvik Mining & Rock Solutions. Viktor…
2023-11-09
Freemelt in new agreement with IHI Europe for Freemelt ONE, targeting Titanium Aluminide Aeroengine applications
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing has reached an rental agreement with IHI Europe Ltd of a second Freemelt ONE machine at their research site in Cambridge, UK. The order value is approximately MSEK…
2023-11-08
Regulatory
Freemelt Holding AB (publ) interim report Q3 2023
Freemelt Holding AB (publ) whose groundbreaking solutions create new conditions for rapid growth in 3D printing – reports Q3 earnings. Freemelt – listed on Nasdaq First North Growth Market – is one of the leading suppliers of advanced additive manufacturing solutions. THE GROUP’S KEY FIGURES KSEK Jul-Sep Jul-Sep…
2023-11-01
Freemelt launches new eMELT model at Formnext in Frankfurt – Strengthens its position of solutions for large-scale industrial 3D printing
Nasdaq First North-listed Freemelt launches a brand new eMELT model, eMELT-iD. The model is aimed for development of industrial applications. It enables efficient product and application development as well as preparation for mass production. The launch will take place at Formnext in Frankfurt, Germany, on 7-10 November. The…
2023-10-27
Freemelt takes a new important step in the industrialization of 3D printing in America
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing, has entered into an agreement with Texas A&M Engineering Experiment Station (TEES), to collaborate on accelerating the industrialization of metal 3D printing in the USA. TEES began…
2023-10-26
Freemelt Q3 2023, live webcast
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D printing will host a live webcast in connection to the company’s Interim report for July – September, Q3 2023. Save the date! November 9th 8am CET, Freemelt’s…
2023-10-05
Regulatory
Freemelt in global breakthrough agreement for the new industrial machine eMELT
Nasdaq First North-listed Freemelt, whose superior solutions create new conditions for rapid growth and development in 3D printing, has signed an agreement with a global leading technology company regarding Freemelt’s groundbreaking new industrial machine – eMELT. The customer has an interest in eMELT for large-scale 3D production of Tungsten…
2023-09-12
Nuclear Researchers to Use Freemelt EBM Metal 3D Printer for Materials
3DPRINT.COM article 23.09.05. Freemelt, known for its open architecture electron beam 3D printers has recently secured an order for its Freemelt ONE system from the Institute for Nuclear Research (ATOMKI) in Hungary. This new collaboration represents a milestone for 3D printing technology, particularly in the high-stakes field of nuclear…
2023-09-01
Freemelt receives an order of Freemelt ONE from Turkish university
Nasdaq First North-listed Freemelt – a deep-tech, green-tech company whose groundbreaking solution creates new conditions for rapid growth in 3D-printing has in a short time received an additional order for a Freemelt ONE machine. This time from a Turkish university, which will use the machine for electron beam…
2023-08-31
Freemelt receives an order of Freemelt ONE from Hungarian nuclear research institute
Nasdaq First North-listed Freemelt – a deep-tech and green-tech company whose groundbreaking solutions create new conditions for rapid growth in 3D-printing, has received an order for a Freemelt ONE system from the Institute for Nuclear Research (ATOMKI) in Hungary to be used for research in nuclear material science. The…
2023-08-18
Regulatory
CEO and senior executives subscribe to employee stock options
In accordance with the decision at the general meeting on May 25, 2023, Freemelt has established a long-term incentive program by issuing so-called qualified employee stock options – “Incitamentsprogram 2023/2027”. The CEO and two senior executives have subscribed to a total of 1 140 000 employee stock options. The potential dilution…
2023-08-10
Regulatory
Freemelt Holding AB (publ) interim report Q2 2023
Freemelt Holding AB (publ) whose groundbreaking solutions create new conditions for rapid growth in 3D printing – reports Q2 earnings. Freemelt – listed on Nasdaq First North Growth Market – is one of the leading suppliers of advanced additive manufacturing. THE GROUP’S KEY FIGURES KSEK Apr – Jun…
2023-06-08
Freemelt strengthens competitiveness with new patent
Nasdaq First North-listed Freemelt – a high-tech commercial company whose ground-breaking solution creates new conditions for rapid growth in 3D-printing – has been granted patents in China and Japan for the company’s method of point-by-point preheating of each powder layer in Freemelt’s 3D-printing process, so called Spot Preheating. The…
2023-06-05
Freemelt is granted a patent in Japan for cathode technology
– the heart of the company’s technology. Nasdaq First North-listed Freemelt – a high-tech commercial company whose pioneering solution creates new conditions for rapid growth in 3D-printing – has been granted a patent in Japan for important solutions in the products’ electron gun. The patent concerns the cathode,…
2023-05-25
Regulatory
PRESS RELEASE FROM THE ANNUAL GENERAL MEETING ON 25TH OF MAY IN FREEMELT HOLDING AB (PUBL)
The annual general meeting of Freemelt Holding AB (publ) (“Freemelt” or “the Company”) was held today on 25th of May 2023. Below is a summary of what was resolved during the meeting. This English version is a translation of the Swedish original. The Swedish text is the binding…
2023-05-10
Regulatory
Freemelt Holding AB (publ) interim report Q1 2023
Freemelt Holding AB (publ) whose groundbreaking solution creates new conditions for rapid growth in 3D printing – starts the year with positive operating cash flow. Freemelt – listed on Nasdaq First North Growth Market – is today one of the leading suppliers of advanced additive manufacturing. THE GROUP’S…
2023-04-27
Regulatory
NOTICE OF ANNUAL GENERAL MEETING IN FREEMELT HOLDING AB (PUBL)
The shareholders of Freemelt Holding AB (publ), org.nr 559105-2922 (the ”Company”), are hereby summoned to the Annual General Meeting (AGM) on Thursday May 25th at 14.00 which will be held in conference room Valö at Södra Porten Konferens, Flöjelbergsgatan 1, Mölndal. Entry to the AGM takes place from 13:50.
2023-04-13
Regulatory
Freemelt takes another important step for international expansion
– Appoints Lisa Törsäter as Chief Marketing Officer Nasdaq First North-listed Freemelt appoints Lisa Törsäter to the newly established position as Chief Marketing Officer. Her mission will be to execute a long-term marketing strategy for Freemelt’s continued journey to become a global leader in the market for advanced…
2023-04-11
Another Freemelt ONE order to US University
Nasdaq First North-listed Freemelt – a high-tech commercial company whose groundbreaking solutions create new conditions for rapid growth in metal 3D- Printing – secures another order of Freemelt One to the North American market. This time to NC State University, The Center for Additive Manufacturing and Logistics (CAMAL). This…
2023-04-11
Regulatory
Freemelt changes goodwill accounting method – time-of-use shortened to 5 years
Nasdaq First North listed Freemelt is harmonising with K3 accounting rules and consequently changes goodwill time-of-use treatment. The change implies goodwill is depreciated over five years instead of as previously stated 10 years. The decision to change the goodwill depreciation period is a pure accounting measure with no cash…
2023-03-29
Regulatory
Freemelt appoints new Head of the EMEA region
– Establishment in Mölndal, Sweden for further expansion Listed on Nasdaq First North, Freemelt has recruited a new manager to the newly created position of Regional President for the EMEA market. His mission is to establish a sales and service organization with a focus on partnerships with leading…
2023-03-16
Regulatory
Nomination Committee of Freemelt Holding AB (publ) for the 2023 Annual General Meeting
The Nomination Committee of Freemelt Holding AB (publ) for the 2023 Annual General Meeting has been appointed: Peter Wolpert (CEO) representing IndustrifondenErik Nerpin (Chairman of the Board & co-founder) representing Blasieholmen Investment Group The Nomination Committee is to furnish proposals in matters to be presented to,…
2023-03-13
Regulatory
Press release from the Extraordinary General Meeting on 13th of March 2023 in Freemelt Holding AB (publ)
The extra general meeting of Freemelt Holding AB (publ) (“Freemelt” or “the Company”) was held today on 13 March 2023. Below is a summary of what was resolved unanimously during the meeting. Resolution on issue of new shares The extraordinary general meeting resolved unanimously, in accordance with…
2023-03-10
Interview with Freemelt’s CEO
Nasdaq First North-listed Freemelt is watched by Redeye, who specializes in innovative and fast-growing Nordic companies. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. Redeye has interviewed Freemelt’s CEO, Daniel Gidlund. During the interview, Gidlund shed light on…
2023-03-10
Presentation of Freemelt on Investor Day
Nasdaq First North-listed Freemelt has participated in Investor Day, which was arranged by the Nordic investment bank ABG Sundal Collier. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. Freemelt’s CEO Daniel Gidlund and CIO Ulric Ljungblad participated in…
2023-03-03
Freemelt organizes for rapid global growth
Freemelt – listed on Nasdaq First North – continues its rapid development as a leading supplier of powerful 3D printers. As part of this, the company is building a regional sales and service organization, which means that Freemelt will appoint regional presidents for its three regions: North America, EMEA…
2023-02-21
Notice of extra general meeting in Freemelt Holding AB (publ)
The shareholders of Freemelt Holding AB (publ), reg. no. 559105-2922, (the “Company”) are hereby invited to the extra general meeting on Monday 13 March 2023 at 10:00 CET at the Company’s premises on Bergfotsgatan 5A in Mölndal. Right to attend the general meetingShareholders who wish to attend…
2023-02-21
Regulatory
Freemelt has carried out a directed share issue of SEK 66 million, partly subject to resolution by an extraordinary general meeting
NOT FOR RELEASE, PUBLICATION OR DISTRIBUTION IN WHOLE OR IN PART, DIRECTLY OR INDIRECTLY, IN OR INTO THE UNITED STATES, AUSTRALIA, CANADA, NEW ZEALAND, SINGAPORE, HONG KONG, JAPAN, SOUTH AFRICA OR ANY OTHER JURISDICTION WHERE SUCH RELEASE, PUBLICATION OR DISTRIBUTION WOULD BE UNLAWFUL OR WOULD REQUIRE REGISTRATION OR ANY…
2023-02-21
Regulatory
Freemelt announces intention to carry out a directed share issue
NOT FOR RELEASE, PUBLICATION OR DISTRIBUTION IN WHOLE OR IN PART, DIRECTLY OR INDIRECTLY, IN OR INTO THE UNITED STATES, AUSTRALIA, CANADA, NEW ZEALAND, SINGAPORE, HONG KONG, JAPAN, SOUTH AFRICA OR ANY OTHER JURISDICTION WHERE SUCH RELEASE, PUBLICATION OR DISTRIBUTION WOULD BE UNLAWFUL OR WOULD REQUIRE REGISTRATION OR ANY…
2023-02-21
Regulatory
Freemelt holding AB (publ) Interim Report Q4 and full year 2022
Freemelt Holding AB (publ) whose groundbreaking solution creates new conditions for rapid growth in 3D printing – ends 2022 strongly with the company’s best quarter to date. Freemelt – listed on Nasdaq First North Growth Market – is today one of the leading suppliers of advanced additive manufacturing. The…
2023-02-20
Freemelt appoints Eric Bert as President of Freemelt – Americas
– A newly formed US subsidiary for accelerated expansion Nasdaq First North-listed Freemelt – a high-tech commercial company whose groundbreaking solutions create new conditions for rapid growth in 3D printing – appoints Eric Bert to the newly created position of President of Freemelt – Americas. He will initially…
2023-02-13
Freemelt receives fusion research order
– Will develop new methods for 3D printing with tungsten for fusion power plants Nasdaq First North-listed Freemelt – a high-tech commercial company whose groundbreaking solution creates new conditions for rapid growth in 3D printing – has received an order for a materials development project from the United…
2023-02-09
Freemelt granted additional US patent
– Innovative method employs ultraviolet light for improving resolution and stability in 3D printing Nasdaq First North-listed Freemelt – a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing – has been granted a patent in the United States. The patent protects…
2022-12-28
New Freemelt ONE order to North America
– Further strengthening its position in the important R&D market Nasdaq First North-listed Freemelt – whose groundbreaking solutions enhance the possibility for rapid growth and development in 3D printing – has taken its sixth order in the North American research market. This time it is Texas A&M University…
2022-12-23
Regulatory
Martin Granlund appointed new CFO at Freemelt
Nasdaq First North-listed Freemelt – whose groundbreaking solutions enhance the possibility for rapid growth and development in 3D printing – appoints Martin Granlund as new CFO. Martin Granlund has extensive experience in the financial industry, such as from SEB, Nasdaq OMX and as CFO of the Dutch company TOM,…
2022-12-23
Fifth Freemelt ONE order to North America
– Continues to strengthen its position in the important R&D market Nasdaq First North-listed Freemelt – whose groundbreaking solutions enhance the possibility for rapid growth and development in 3D printing – has taken the fifth order in the North American research market in the last 12 months. This…
2022-12-14
Freemelt receives order from university in Germany
Nasdaq First North-listed Freemelt – a high-tech commercial company whose groundbreaking solution creates new conditions for rapid growth in 3D printing – strengthens its footprint in Germany by an order for a Freemelt ONE system from Bergische University Wuppertal. The order includes ProHeat™ and will be used for research…
2022-12-07
Yet another successful Formnext trade show
Freemelt had a busy and successful Formnext show! In the enclosed video, you can meet our customers and colleagues in our booth. We had a lot of interesting discussions regarding our research system Freemelt ONE, our upcoming industrial system eMELT and our new software Pixelmelt. Link to video…
2022-12-07
Interview with Freemelt’s newly appointed CEO
Nasdaq First North-listed Freemelt is watched by Redeye, which specializes in innovative and fast-growing Nordic companies. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. The company’s protected technology – which has already begun to be sold – takes 3D…
2022-12-05
Freemelt strengthens the board
Nasdaq First North-listed Freemelt Holding AB – has at an extraordinary general meeting elected entrepreneur and professor Johannes Henrich Schleifenbaum and co-founder Ulric Ljungblad as new members of the company’s board. At the meeting, Martin Wildheim resigned from the board. Professor Johannes Henrich Schleifenbaum is a leading researcher…
2022-11-25
Correction: Notice of Extraordinary General Meeting of Freemelt Holding (publ)
The correction relates to the incorrect date for when notification of participation to the meeting must be received by the company. The date has been changed from November 25 to November 28. The shareholders of Freemelt Holding AB (publ), corporate identity number 5591052922 (the “Company”), are hereby summoned…
2022-11-21
Notice of Extraordinary General Meeting of Freemelt Holding (publ)
The shareholders of Freemelt Holding AB (publ), corporate identity number 5591052922 (the “Company”), are hereby summoned to the Extraordinary General Meeting on Friday, December 2, 2022, at 10 am, which will be held at the Company’s premises, Flöjelbergsgatan 13 in Mölndal. Access to the Annual General Meeting takes place…
2022-11-14
Come visit us at Formnext
Welcome to visit us at Formnext 2022! We are looking forward to meeting customers, partners, and AM peers. We are also thrilled as a company, as we are launching our industrial system, eMELT. We are running launch sessions twice a day at 11.00 and 14.00. Please stop by…
2022-11-09
Regulatory
Freemelt holding AB (publ) Interim Report Q3 2022
Freemelt Holding AB (publ), whose groundbreaking solution creates new conditions for rapid growth in 3D printing, is listed on Nasdaq First North Growth Market. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. There are therefore no comparative figures for the period. The Group’s…
2022-10-24
Freemelt launches the industrial machine eMELT
– Entering a new phase – offers 3D printing for large-scale manufacturing Nasdaq First North-listed Freemelt, whose groundbreaking solutions create new conditions for rapid growth and development in 3D printing, launches eMELT, its new industrial system at the Formnext trade show in Frankfurt on 15-18 November. eMELT…
2022-09-26
Freemelt receives order from Carnegie Mellon University
Nasdaq First North-listed Freemelt, whose groundbreaking solutions create new conditions for rapid growth and development in 3D printing, has received an order for a Freemelt ONE system from the prestigious Carnegie Mellon University in the USA. The system, containing Freemelt’s new ProHeat module, will be used for materials research…
2022-09-19
Come meet us at the MS&T22 conference in Pittsburgh, October 9-12
Our Principal Scientist Ulf Ackelid is organizing Additive Manufacturing symposia the Materials Science&Technology (MS&T) conference in Pittsburgh PA on October 9-12, 2022. Come meet him and discuss how to use our Freemelt ONE 3D printer for research and development. Ulf has more than 20 years experience of 3D printing using…
2022-09-14
ABG Sundal Collier has initiated coverage of Freemelt
Nasdaq First North-listed Freemelt will from September be covered by the independent Nordic investment bank ABG Sundal Collier. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. The company’s protected technology – which is already available – takes 3D printing…
2022-08-15
Redeye interview with Freemelt’s CEO
Nasdaq First North-listed Freemelt is covered by Redeye, which specializes in innovative and fast-growing Nordic companies. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. The company’s protected technology – which is already available – takes 3D printing to a…
2022-08-11
Regulatory
Freemelt holding AB (publ) Interim Report Q2 2022
Freemelt Holding AB (publ), whose groundbreaking solution creates new conditions for rapid growth in 3D printing, is listed on Nasdaq First North Growth Market. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. There are therefore no comparative figures for the period. The Group’s…
2022-07-20
Regulatory
Freemelt shifts up – appoints Daniel Gidlund as new CEO
Nasdaq First North-listed Freemelt – whose groundbreaking solutions create new conditions for rapid growth and development in 3D printing – has appointed Daniel Gidlund as its new CEO. Daniel Gidlund comes most recently from Sandvik Mining & Rock Solutions in the role of Vice President Sales, Division Parts &…
2022-07-07
Freemelt granted patent for ProHeat™
– New method for preheating powder opens unique opportunities Nasdaq First North-listed Freemelt – a high-tech growth company whose unique solution creates new conditions for rapid growth in 3D printing – has been granted a patent in Sweden for ProHeat™. The patent relates to a method for robust…
2022-06-28
Freemelt’s Managing Director of Global Sales has bought shares in Freemelt
Peter Jain, Managing Director of Global Sales and of Freemelt’s German subsidiary, has bought 2,000 shares in Freemelt Holding AB. The average share price was SEK 11.30, and the total investment was approximately 23 kSEK. The transaction was completed on June 21, 2022. About Peter JainPeter Jain…
2022-06-28
Freemelt granted patents in the US and Europe
– New method of removing powder in confined spaces Nasdaq First North-listed Freemelt – a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing – has been granted patents in the US and Europe. The patents relate to a method of removing…
2022-06-13
Freemelt receives order from university in Slovenia
— New market and focus on materials research in orthopedic applications Nasdaq First North-listed Freemelt – whose pioneering solutions create new conditions for rapid growth and development in 3D printing – has received an order for a Freemelt ONE system from the University of Maribor. The system, which…
2022-05-31
Redeye has initiated coverage of Freemelt
Nasdaq First North-listed Freemelt will from May be covered by Redeye, which specializes in innovative and fast-growing Nordic companies. Freemelt is a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing. The company’s protected technology – which is already available – takes 3D…
2022-05-31
Freemelts Holding AB’s board member, Cecilia Jinert Johansson, has expanded her holding in the company
Cecilia Jinert Johansson, board member of Freemelt Holding AB, has increased her holding in Freemelt Holding AB by 10 000 shares. The average share price was 10.58 SEK, and the investment was approximately 106 kSEK. The transaction was completed on May 30, 2022. About Cecilia Jinert JohanssonBoard…
2022-05-17
Freemelt launches Pixelmelt®
– New software for increased productivity and faster innovation Nasdaq First North-listed Freemelt – a high-tech growth company whose groundbreaking solution creates new conditions for rapid growth in 3D printing – introduces Pixelmelt®, a new software for faster material development and more productive 3D printing. Pixelmelt is® launched…
2022-05-13
Come visit us at Rapid-tech
We look forward to meeting you May 17th to 19th at the rapid-tech trade fair. Stop by the Freemelt booth at 2-515. Peter Jain, Managing Director Sales, will showcase our open platform Electron-Beam PBF Freemelt One System which enables Material Development. You are also most welcome to listen…
2022-05-11
Regulatory
Freemelt holding AB (publ) Interim Report Q1 2022
Freemelt Holding AB (publ), whose groundbreaking solution creates new conditions for rapid growth in 3D printing, is listed on Nasdaq First North Growth Market. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. There are therefore no comparative figures for the period. The Group’s…
2022-05-06
Freemelt’s CEO participates in Aktieportföljen Live
On May 11, Freemelt’s CEO Ulric Ljungblad will participate in Aktieportföljen Live and, among other things, present the Company’s report for the first quarter of 2022, which will be published the same day. Aktieportföljen Live runs from 10.35 to 15.50 and Freemelt’s presentation will be held from 14.45…
2022-05-06
Freemelt signs agreement with TTA, additional reseller in the US
Nasdaq First North listed Freemelt – a high-tech growth company whose pioneering solution creates new conditions for rapid growth in 3D printing – enters into an agreement with one of the leading educational resellers in the United States, Technical Training Aids, TTA. This is another step towards continued global…
2022-05-02
Freemelt signs agreement with Tech-Labs, its first US reseller
Freemelt is a high-tech growth company whose pioneering solution creates new conditions for rapid growth in 3D printing, enters into an agreement with one of the leading educational resellers in the United States, Tech-Labs. This is another step towards continued global expansion and growth of Freemelt’s research system, Freemelt…
2022-04-27
Freemelt appoints Jonas Fogelberg as CFO
Nasdaq First North-listed Freemelt, whose pioneering solutions create new conditions for rapid growth and development in 3D printing, has appointed Jonas Fogelberg as interim CFO. Jonas Fogelberg has extensive experience from leading positions in both global industrial companies and academia. His most recent position is at Volvo GTT, and…
2022-04-26
Notice of Annual General Meeting of Freemelt Holding (publ)
The shareholders of Freemelt Holding AB (publ), corporate identity number 559105-2922 (the “Company”), are hereby summoned to the Annual General Meeting on Tuesday, May 24, 2022, at 14:00, which will be held in conference room Orust at Flöjelbergsgatan 1C, Mölndal. Access to the Annual General Meeting takes place from…
2022-04-13
Freemelt expands and appoints new agent in Turkey
Freemelt is a high-tech growth company whose pioneering solution creates new conditions for rapid growth in 3D printing, enters into an agreement with one of Turkey’s leading retailers, InfoTRON. This is another step towards continued global expansion and growth of Freemelt’s research system, Freemelt ONE. Swedish Freemelt takes…
2022-04-12
Freemelt receives order from Georgia Tech
Nasdaq First North-listed Freemelt, whose pioneering solutions create new conditions for rapid growth and development in 3D printing, has received an order for a Freemelt ONE system from the prestigious Georgia Institute of Technology in the US. The system will be used for materials research and will be delivered…
2022-04-06
Fredrik Berne leaves as CFO of Freemelt
Fredrik Berne, Freemelt’s CFO, has decided to leave his position. Fredrik Berne took office in connection with the company’s IPO in the summer of 2021 and will end his employment on May 24, 2022. “Fredrik joined Freemelt when it was a start-up and leaves a commercially successful company.
2022-03-30
Come visit us at AMUG
We look forward to meeting you April 3-7 at the AMUG Conference. Stop by the Freemelt booth at #78. Peter Jain, Managing Director Sales, will showcase our open platform Electron-Beam PBF Freemelt One System which enables Material Development. Details about AMUGAMUG 2022Hilton ChicagoUnited States, Chicago…
2022-03-10
Freemelts Holding AB’s Chairman, Carl Palmstierna, has expanded his ownership in the company
Carl Palmstierna, Chairman of Freemelt Holding AB, has through his company Palmstiernainvest AB increased his ownership in Freemelt Holding AB by 1461 shares. The share price was 10 SEK, and the size of the investment was around 15 kSEK. The transaction was completed on March 8, 2022. About…
2022-02-28
Freemelts Holding AB’s Chairman, Carl Palmstierna, has expanded his ownership in the company
Carl Palmstierna, Chairman of Freemelt Holding AB, has through his company Palmstiernainvest AB increased his ownership in Freemelt Holding AB by a total of 11 563 shares. 2472 shares were bought at a price of 8.62 SEK, and the size of the investment was around 21 kSEK. The…
2022-02-25
Presentation by Freemelt at ProHearings capital market day
Freemelt’s CEO, Ulric Ljungblad, participated in ProHearings shared capital market day on 24/2 2022 and gave a presentation regarding the content of Freemelt’s recently published Q4 report. The presentation, in Swedish, is available at: https://www.youtube.com/watch?v=0R2Nap-gNS8 Contacts For more information, please contact:Ulric…
2022-02-24
Freemelts Holding AB’s Chairman, Carl Palmstierna, has expanded his ownership in the company
Carl Palmstierna, Chairman of Freemelt Holding AB, has through his company Palmstiernainvest AB increased his ownership in Freemelt Holding AB by 7271 shares. The share price was 9.98 SEK, and the size of the investment was around 73 kSEK. The transaction was completed on February 23, 2022. About…
2022-02-23
Freemelts Holding AB’s Chairman, Carl Palmstierna, has expanded his ownership in the company
Carl Palmstierna, Chairman of Freemelt Holding AB, has through his company Palmstiernainvest AB increased his ownership in Freemelt Holding AB by 30 858 shares. The share price was 9.77 SEK, and the size of the investment was around 300 kSEK. The transaction was completed on February 22, 2022.
2022-02-22
Regulatory
Freemelt Holding AB (publ) Interim Report Q4 2021
Freemelt Holding AB (publ), which develops and sells 3D printers, is listed on the Nasdaq First North Growth Market. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. The Group’s accumulated results in this report therefore refer to the period 2021-06-17 – 2021-12-31. Financial…
2022-02-21
Freemelt receives an order for a Freemelt ONE from a Swedish university
Nasdaq First North-listed Freemelt, whose pioneering solutions create new conditions for rapid growth and development in 3D printing, has received an order for a Freemelt ONE system from Linköping University. The system will be used for materials research and will be delivered during the first half of 2022. Freemelt…
2022-01-12
Freemelt focuses on strong expansion – two managers with new roles
Nasdaq First North Growth Market-listed Freemelt has appointed Ulf Hansson, formerly working with system sales at Freemelt, to new Systems Development Manager. Ulf Hansson, with a previous background as R&D manager within Ericsson Microwave Systems, now takes over the responsibility for systems development from Per Woxenius, who assumes a…
2022-01-04
Freemelt receives second order from the US
Nasdaq First North Growth Market listed Freemelt, whose pioneering solutions create new conditions for rapid growth and development in 3D printing, has received an order for a Freemelt ONE system from The University of Texas at El Paso, USA. The system will be used for material research and will…
2021-12-15
Freemelt receives order for Freemelt ONE from its first American customer
Freemelt has received an order for a Freemelt ONE system from a company in the United States of America with an order value close to 0.5 million USD. The system will be used for material development for new applications, and it will be delivered during the first quarter in…
2021-12-10
Freemelts Holding AB’s Chairman, Carl Palmstierna, has expanded his holding in the company
Carl Palmstierna, Chairman of Freemelt Holding AB, has increased his holding in Freemelt Holding AB by 30,000 shares. The transaction was completed on December 9, 2021. About Carl PalmstiernaChairman of the Board of Freemelt Holding AB since 2021.Former Chairman of the Board of Freemelt AB between…
2021-12-01
Freemelt and Etteplan enter into strategic partnership in 3D printing
Freemelt and Etteplan enter into strategic partnership in 3D printing to jointly develop Freemelt’s coming industrial 3D printer. The partnership combines Freemelt’s capabilities in designing and building 3D printers and Etteplan’s capabilities in engineering and software development. It also aims at joint commercial activities towards the AM industry.
2021-11-15
Regulatory
Freemelt AB and 6K Additive Establish Strategic Partnership
Freemelt AB and 6K Additive establish strategic partnership to develop and commercialize refractory metal powder for the Freemelt E-PBF printer platform. The Partnership enables new material options for advanced customers for aerospace, hypersonic and medical applications that require high-performing material properties. Burgettstown PA and Mölndal, Sweden. November 15,…
2021-11-10
Come meet us at Formnext
Freemelt will exhibit at Formnext. You will find us in Hall 12.0 in booth 138. We will present Freemelt ONE and its technology.Want a meeting or presentation? Please contact us at info@staging.freemelt.com(1) Post | Feed | LinkedInWelcome!…
2021-11-03
Regulatory
Freemelt Holding AB (publ) Interim Report Q3 2021
Freemelt Holding AB (publ), which develops and sells 3D printers, is listed on the Nasdaq First North Growth Market. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. The Group’s accumulated results in this report therefore refer to the period 2021-06-17 – 2021-09-30. Financial…
2021-11-02
Regulatory
Freemelt receives order from the Polytechnic University of Turin
Freemelt, listed on Nasdaq First North Growth Market, has received an order at a value of approximately SEK 3,5 million for a Freemelt ONE system, including options, from the Polytechnic University of Turin in Italy. The system will be used for new materials development. The Polytechnic University of…
2021-11-02
Freemelt has received its first granted patent
Freemelt has been informed that the company has received patent approval for application number US17/050924 from the United States Patent and Trademark Office (USPTO). The patent provides protection regarding a self-sealing build compartment for 3d printing with metal powder, which enhances the certainty of contamination-free 3d printing with Freemelt’s…
2021-10-25
Freemelt enters German market with subsidiary and Showroom
Freemelt Deutschland GmbH, a wholly owned subsidiary of Freemelt AB, with a new Freemelt office in Esslingen close to Stuttgart in Germany, has been established to manage the commercialization of Freemelt systems in Germany and in Europe at large. Peter Jain, part of the Freemelt management team as…
2021-09-28
Regulatory
Cecilia Jinert Johansson has been elected to the board of the tech company Freemelt
The tech company Freemelt announces today that Cecilia Jinert Johansson will be a new board member. Cecilia Jinert Johansson has a long and broad experience from the industrial sector and today runs her own consulting business with assignments within companies such as Mycronic, BillerudKorsnäs and Danish Dinex. She has…
2021-09-14
Notice of Extraordinary General Meeting of Freemelt Holding (publ)
The shareholders of Freemelt Holding AB (publ), corporate identity number 559105-2922 (the “Company”), are hereby summoned to the Extraordinary General Meeting on Tuesday, September 28, 2021, at 10 am, which will be held at the Company’s premises, Bergfotsgatan 5A in Mölndal. Access to the Annual General Meeting takes place…
2021-08-31
Regulatory
Freemelt Holding AB (publ) Interim Report Q2 2021
Freemelt Holding AB (publ), which develops and sells 3D printers, was recently listed on the Nasdaq First North Growth Market. The company now presents its first public quarterly report. The group was first formed 2021-06-17 when Freemelt Holding AB acquired Freemelt AB. The Group’s results in this report therefore…
2021-07-13
Interview with CEO Ulric Ljungblad and CTO Per Woxenius
In Finansräven’s latest podcast, Ulric Ljungblad and Per Woxenius are interviewed how they view the 3D printing industry in general and Freemelt in particular. In the interview, Ulric and Per give their views on Freemelt and its role in the 3D printer industry. Other things that are discussed…
2021-07-06
Freemelt Recruits Sales Director from Desktop Metal
Peter Jain becomes the new sales director for the expansive tech company Freemelt, working with pioneering 3D printing solutions. Peter Jain most recently came from one of the world’s most acclaimed 3D printing companies – Desktop Metal, which is listed on the NYSE. There he held the position as…
2021-07-05
FREEMELT HOLDING AB (PUBL) HAS BEEN APPROVED FOR LISTING ON NASDAQ FIRST NORTH GROWTH MARKET
Nasdaq Stockholm AB has approved Freemelt Holding AB’s (publ) (“Freemelt” or “the Company”) application for admission to trading of the Company’s shares on Nasdaq First North Growth Market. The company will be traded under the short name “FREEM” with ISIN code SE0011167170. The first day of trading is July…
2021-05-03
New Production Manager
We are proud to announce Henrik Tölander as our new Production Manager. Henrik has previously worked as Production Program Manager for Additive Manufacturing at Siemens Industrial Turbomachinery and most recently as Additive Manufacturing Expert at Etteplan. Henrik will with be part of the management team at Freemelt and lead…
2021-03-11
Freemelt announces multiple orders
We are happy and proud to announce two orders from KTH Royal Institute of Technology in Stockholm, Sweden. The first order is a Freemelt ONE system for advanced materials research. The second order is a custom-made E-PBF system for synchrotron radiation…
2020-11-04
The 1st Freemelt Newsletter
The first newsletter from Freemelt was emailed to our subscribers today. Do you want to stay updated too? Sign up here! Get our newsletters delivered to your inbox Please leave this field empty.
2020-10-01
ProHeat – new innovation for powder heating without electron interaction
Freemelt has recently announced ProHeat, a new innovation for heating of the powder bed. ProHeat makes it possible to heat and sinter the powder bed in a gentle and uniform manner, without exposing it to electric charge. ProHeat opens up a wider range of processable materials for Electron Beam…
2020-09-10
Freemelt is among the prestigious 33!
Hooray! Freemelt made it to the “33-list” recognizing the most innovative and promising Swedish startups in 2020! This list is co-published yearly by the renowned magazines NyTeknik (technology) and Affärsvärlden (business). Since the start in 2008, the 33-list has fostered several successful Swedish companies. Read more in …
2020-07-23
Metal AM Magazine, summer issue 2020
Freemelt is featured in the recent issue of Metal AM Magazine (summer 2020). Learn more about our open source philosophy and Electron Beam Powder Bed Fusion in two in-depth articles.
2020-05-27
Open materials strategy defined as key AM trend in a new report
The Additive Manufacturing Landscape 2020 is the title of a new interesting market report from AMFG in London. The report identifies “The move towards an open materials model” as a key trend in additive manufacturing, concluding that increasingly more companies are expected to adopt an open materials strategy in the…
2020-04-28
Freemelt contributes to groundbreaking research project – Postdoc positions available in Stockholm/Hamburg!
Freemelt is a proud partner and supplier to the R&D project Real-time measurements of additive manufacturing with electron-beam melting that recently received funding from the Swedish Research Council through the Röntgen-Ångström Cluster. The project aims to employ high-speed synchrotron X-ray imaging to monitor the Electron Beam Powder Bed Fusion…
2020-03-26
Freemelt support cloud launched
Freemelt ONE now comes fully prepared for remote installation and remote software upgrades equipped with a connection to a brand new Freemelt Support Cloud! We can now perform advanced remote diagnostics and remote upgrade of all software including firmware and PLC software on customer Freemelt ONE systems.
2020-03-11
EBAM 2020 postponed
Freemelt was going to exhibit at EBAM 2020, the 3rd International Conference on Electron Beam Additive Manufacturing, in Erlangen, Germany, 25-27 March. Due to the corona virus situation, the conference has been postponed until 5-7 October 2020. We will be there in October, looking forward to presenting Freemelt…